Filter
Top Products
11
R
EMOTE
C
ONTROL
A
NYWHERE
! K
IT
Step 6 – Running the Sensor Cable
Conceal the sensor cable between the sensor and the
connection hub.
For specific information refer to “Running Sensor Cable in New
Construction”, located on
page 16, or “Concealing Sensor
Cable in Existing Walls”, located on page 18.
If you need to cut and restrip the wire, make sure that only
1/4" of wire is exposed. Exposing too much wire could create
“shorts” within the system.
IMPORTANT
If you have doubts about whether you are capable of installing
a Niles Remote Control Anywhere! Kit in your walls, consult a Niles
dealer or professional installer. They have special tools, techniques,
and experience to make the impossible possible. The installer can
provide you with an estimate before any work is done.
DS00408ACN_RCA3 Kit.qxp 1/17/05 3:52 PM Page 11