Nokia 9400 S Satellite TV System User Manual


 
GB 16
While listening to radio Programmes you can see a programme
list on the screen by pressing the OK button. You can change
to another channel by pressing the UP/DOWN buttons and
then pressing the OK button. To move faster (8 at the time)
between the channels you can also use the DOUBLE ARROW
buttons.
With a Video Cassette Recorder (VCR) connected you can watch/record video tapes.
If your VCR is connected with a SCART cable and you press the start button on the VCR, the
playback will start and interrupt the TV programme from the Mediamaster.
To watch TV programmes again, press the TV button or stop the VCR.
Please note, that during the recording of a programme, everything shown on the screen will be
registered! For example: If you call up a Menu from the Mediamaster on the screen, the menu will
be recorded!
Pressing the TEXT button once while watching TV enables the teletext output to the TV.
To enable the teletext display on the TV, press the Teletext button on the TVs remote control.
This is only possible if more than one subtitling language is being transmitted. Please refer to the
instruction manual of your TV for the teletext function. Exit the menu by pressing the TV button.
Press the MENU button and you will get the Main Menu on the
TV screen. Press the EXIT button to leave the menu.
If you select one of the highlighted titles and press the OK
button, a submenu will be shown on the TV screen. From a
submenu you can adjust settings to your own requirements.
List of Radio Channels
Video Recorder
Subtitling and Teletext. The TEXT Button
SETTING FROM THE MAIN MENU