Nokia 9400 S Satellite TV System User Manual


 
GB 4
Keep a clear space around the Mediamaster to allow for sufficient ventilation.
Do not cover the Mediamaster or place it on a unit that emits heat.
Use a soft cloth and a mild solution of dish washing liquid to clean the casing.
Never allow liquids, spray or other materials to come into contact with the inside of the
Mediamaster.
Service should be carried out only at a Nokia authorized service center.
Do not connect or modify cables when the Mediamaster is plugged in.
Do not remove the cover.
Do not allow the unit to be exposed to hot, cold or humid conditions.
Please note that the only way to isolate the Mediamaster completely from the 230 V mains supply
is to unplug the mains lead!
FOR YOUR SAFETY
Rear panel
RS232
For a PC.
LNB input
Satellite dish
input
(F-connector).
LNB output
Satellite signal (IF) output
with loop through. For
connection to the other
satellite receiver if needed.
TV SCART
For the audio
/video input of the
TV set.
TV AERIAL
For a terrestrial
(conventional)
TV aerial.
AUX SCART
For connection to a
VCR or an analogue
satellite receiver.
V
IDEO OUTPUT
Composite video
signal output for a
TV set.
AUDIO L R
Stereo outputs for
connection to a HiFi
system.
POWER CABLE
230 V AC
50 Hz
TV/VCR
For an RF-Cable
to the aerial
input of the TV
or VCR.