Nokia 9650S Satellite TV System User Manual


 
GB 17
While listening to radio Programmes you can see a programme
list on the screen by pressing the
OK
button. You can change
to another channel by pressing the
UP/DOWN
buttons and
then pressing the
OK
button. To move faster (8 at the time)
between the channels you can also use the
DOUBLE ARROW
buttons.
With a Video Cassette Recorder (VCR) connected you can watch/record video tapes.
If your VCR is connected with a SCART cable and you press the start button on the VCR, the
playback will start and interrupt the TV programme from the Mediamaster.
To watch TV programmes again, press the
TV
button or stop the VCR.
Please note, that during the recording of a programme,
everything
shown on the screen will be
registered! For example: If you call up a Menu from the Mediamaster on the screen, the menu will
be recorded!
Pressing the
TEXT
button once while watching TV enables the teletext output to the TV.
To enable the teletext display on the TV, press the
Teletext
button on the TV’s remote control.
This is only possible if more than one subtitling language is being transmitted. Please refer to the
instruction manual of your TV for the teletext function. Exit the menu by pressing the
TV
button.
Press the
MENU
button and you will get the Main Menu on the
TV screen. Press the
EXIT
button to leave the menu.
If you select one of the highlighted titles and press the
OK
button, a submenu will be shown on the TV screen. From a
submenu you can adjust settings to your own requirements.
List of Radio Channels
Video Recorder
Subtitling and Teletext. The TEXT Button
SETTING FROM THE MAIN MENU