Filter
Top Products
GB 7
Refer to your video recorder manual for full instructions.
!"
Connect one SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
!"
Connect another SCART cable between the VCR
and the VCR SCART socket on the Mediamaster.
!"
Connect the RF cable from the RF output on the
VCR to the TV aerial input on the TV.
!"
Connect the TV aerial to the RF input socket on the
VCR.
!"
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
!"
Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
!"
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
!"
Connect the TV aerial to the TV AERIAL input
socket on the Mediamaster.
!"
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
!"
Connect a SCART cable between the VCR and the
VCR SCART socket on the Mediamaster.
!"
Connect an RF cable from the RF output on the VCR
to the TV aerial input on the TV.
!"
Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the VCR.
!"
Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between
the analogue and digital receivers, you need a
Universal Twin LNB.
!"
Cable A between output
A
on the LNB to the LNB socket
on the analogue receiver
.
!"
Cable B between output
B
on the LNB to the ANTENNA socket
on the Mediamaster
.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
Connecting to a TV and a Video recorder
If Your VCR does not have a SCART connector
Connecting to an Analogue satellite receiver and
a Video recorder