Filter
Top Products
GB 16
corresponds to the antenna which you wants to use for the search.
Transponder Freq (MHz): Specify the frequency in GHz. using the numbered buttons on your
remote control. If you enter the wrong number, erase it with the left arrow button.
Polarization: Select polarization; “Horizontal” or “Vertical”.
Symbol Rate (Msym/S): Enter the rate with the numbered buttons.
FEC: Enter the appropriate Forward Error Correction (FEC) value or select “Auto”.
Network Search: Select: “Yes” to search from all transponders used by a specific Service Provider.
(“Yes” is the default setting). Select “No” to search only from the transponder that you have entered
on the line “Transponder Frequency”. (Useful if you do not want to search through all transponders
for a specific program distributor).
By pressing the OK button you can now enter the channel search menu where the Mediamaster
starts to search for channels from the satellite.
Adjust Motor
Please refer to Page 12.
The following will describe the basic functions of your Mediamaster while watching TV or listening to
radio channels.
Sometimes the information may not be displayed as illustrated. Many of the functions
described here are dependent on the Service Provider and/or can only be used if they are
included in the transmitted programme information.
Please note that during the Channel Search procedure, the Mediamaster has downloaded ALL
available channels. This may include channels from various Service Providers, also those to which
you normally do not have access. If you select a programme to which you do not have access, you
will get the message “Service is scrambled or not running” on the screen.
If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “4:3
(Pan & Scan)” or “4:3 (Letterbox)” to change display format. “4:3 (Pan & Scan)” will fill up the
screen vertically, but cut off some information from the left and right sides of the picture. “4:3
(Letterbox)” will give a complete picture, but leave black areas at the top and bottom.
You can select the TV screen format in the “System setting” menu which is a subsidiary of the “User
preference” menu.
VIEWING TV
General Information
TV Screen Format