Filter
Top Products
GB 22
From here you can change the menu language. You also have access to the Parental Control and
the Appearance menus.
By pressing OK on the line “Parental Control” you will be
requested to enter your access code. (Personal Identification
Code).
This code is set to 1234 by the factory. You will then get the
menu from where you can lock some functions in the
Mediamaster.
Receiver lock
If you select “On”, you will have to enter the access code every
time you start the Mediamaster from stand-by.
Lock Installation Menu
If you select “On”, you will have to enter the access code every time you enter the installation menu.
Age Limit
If you want everybody to have access to all available types of programmes, select “Off”.
If you select “On”, you may block programmes unsuitable for children. Select an age limit between 4
and 18 years on the line that appears.
However, you should be aware that not all Service Providers have the necessary codes for these
functions implemented in their transmissions.
Change access code
From here you can change the access code from the standard 1234.
DO NOT FORGET IT! Without it you do not have access to any of the functions where the code
is required!
If you forget it, you have to contact an Authorized Nokia Service Center to get help.
From here you can change the language for the menus, main
audio language and alternative audio language.
USER PREFERENCES
Parental Control
Language Settings