Filter
Top Products
GB 10
Connecting the Mediamaster to the TV
• Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect an RF lead from the TV/VCR output on the
Mediamaster to the RF input socket on the TV.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster (or use an indoor aerial).
There are many different types of TV/VCR and other equipment
that you can connect to the Mediamaster.
In this manual you will see some of the most common ways to
connect your equipment.
If you use RF leads you will have to tune your TV and VCR to the
Mediamaster output channel (see page 12).
If you have problems with your connections and need help, con-
tact your dealer or Service Provider.
Connecting the Mediamaster
Connecting a TV and VCR
Refer to your VCR’s manual for full instructions.
If your TV and VCR have two SCART-sockets
• Connect a SCART lead between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
• Connect a SCART lead between the VCR
and the AUX SCART socket on the
Mediamaster.
• Connect a SCART lead between the VCR and the
second SCART socket on the TV.
• Connect an RF lead from the TV/VCR output on
the Mediamaster to the RF input socket on the VCR.
• Connect an RF lead from the RF output on the
VCR to the TV AERIAL input socket on the TV.
• Connect the TV aerial directly to the TV AERIAL input
socket on the Mediamaster.
• Follow connection details from above, but without
the 3rd SCART lead.
Your VCR will then need to be tuned to the
Mediamaster
If your TV has a SCART-socket and the VCR
has one SCART-socket
TV
SCART
RF
Aerial
1
2
RF
RF
SCART
SCART
Mediamaster
2
1
Video
SCART
Antenn
RF
Antenn
SCART
2
1
RF
Video
Mediamaster
RF
SCART