Olympus DS-320 DVR User Manual


 
28
Using the Variable Control Voice Actuator (VCVA)/
Dictation Mode
ERASE SP DICT
INDEX/
FOLDER
MENU
/VOL
Dictation Mode
Simply pressing the SP DICT button sets up
the recorder for dictating or for recording
messages to be transferred to a PC for
speech-to-text conversion using voice
recognition software.
Dictation mode settings
Recording mode: SP
Microphone sensitivity:DICT
Alarm: OFF
To change settings from DICT mode, see the
following pages:
To change recording mode: See P.25.
To change microphone sensitivity:
See P.26.
To change alarm setting: See P.31.
.....................................................................
Notes
Place the built-in microphone close to the speakers
mouth (2 to 4 inches).
Use of an optional ME12 noise-canceling
microphone is recommended for recording with
minimum ambient noise effects.
S
P
D
IC
T
INDEX/
FOLDER
E
R
A
S
E
M
E
N
U
/V
O
L
Adjusting the VCVA start/stop
actuation level
Move the MENU/VOL switch up or down while
recording to adjust the VCVA start/stop
actuation level (1 to 30). The higher the level,
the more sensitive the VCVA is.
Note
The VCVA start/stop actuation level also varies
depending on the selected microphone sensitivity
mode. For information about microphone sensitivity,
see page 26.
Using the Variable Control Voice
Actuator (VCVA)