Filter
Top Products
Insertion Cell CDE-440-01
Cell Models CDE-440-001, CDE-440-01,
CDE-440-1, CDE-440-5 and CDE-440-
01T are called Insertion or Immersion
Cells.
1.
Certificado de Garantia
4.
Mechanical Description
Cell Model CDE-442 is called Toroydal or
Electrodeless Cell, as it does not offer
electrodes. The body material could be
Epoxy or PTFE, where the Toroydal
nucleus (2) are located, indulging an
electromagnetic field, that will generate
an electrical current (called Focault
Current) proportional to the sample
concentration. This type of cell is
recommended for high clogging
concentration and highly chemically
aggressive.
This Cell can only be used with
Conductivity Analyzer Model# CDCN442.
Toroydal Cell CDE-442
3
Based on process conditions, the cells must be build of material previously specified, such as: Stainless
Steel 316, Epoxy or PTFE with radial electrodes or SS316 annulars, Platinum, Titanium or others
depending on its resistance to the solutions chemical aggressiveness .
The electrical connection is done in isolated teminals with ceramic base located at the cast aluminum head,
SAE 323, with low oxydation degree, treated against corrosion and finished with electrostatic epoxy paint.
The head offers IP-67 protection, allowing the instrumentation cable to go thru by a ½ “NPT threaded hole
or a ½ “ cable knockout.