One for All ONE FOR ALL Universal Remote User Manual


 
Setup Codes For MiniDisc
Denon 0873
JVC 0826, 0681
Onkyo 0868
Sharp 0861
Sony 0490
Setup Codes For Video Accessories
Archer 0160
GC Electronics 0160
Jebsee 0160
Magnavox Web-TV
0818
Philips Web TV 0818
RadioShack 0160
TeleCaption 0171
Sony Web-TV 0850
Setup Codes For Miscellaneous Audio
Aiwa 0010, 0159, 0404
Fisher 0052
Harman/Kardon 0477
Jerrold 0459, 0520
JVC 0073
Nikko 0376
RCA 0056
Scientific Atlanta 0460
Sony 0010, 0159
Starcom 0459
RE-ASSIGNING DEVICE KEYS
You can use the Cinema 5 to operate a second TV or a sec-
ond VCR or any combination of seven home entertainment
components. For example, you may want your Cinema 5 to
control 1 TV, 1 Cable Converter, 1 Receiver, 1 CD Player, 1
DVD Player and 2 VCRs. To accomplish this, you must re-
assign one of the device keys to operate the desired compo-
nent, in this case, a second VCR. The chart below shows
you how to re-assign a particular device key and then set up
your new component.
TV to VCRSETUP* - 992 - VCR - TV - TV - SETUP*
- VCR code
TV to DVD/LD SETUP* - 992 - DVD/LD - TV - TV -
SETUP* - DVD or LD Player code
TV to RCVR SETUP* - 992 - RCVR - TV - TV -
SETUP* - Audio code
TV to CBL/SAT SETUP* - 992 - CBL/SAT - TV - TV -
SETUP* - Cable/DBS code
VCR to TVSETUP* - 992 - TV - VCR - VCR -
SETUP* - TV code
VCR to DVD/LD SETUP* - 992 - DVD/LD - VCR - VCR -
SETUP* - DVD/LD Player code
VCR to RCVR SETUP* - 992 - RCVR - VCR - VCR -
SETUP* - Audio code
VCR to CBL/SAT SETUP* - 992 - CBL/SAT - VCR - VCR -
SETUP* - Cable/DBS code
DVD/LD to TV SETUP* - 992 - TV - DVD/LD - DVD/LD -
SETUP* - TV code
DVD/LD to VCR SETUP* - 992 - VCR - DVD/LD - DVD/LD
- SETUP* - VCR code
DVD/LD to RCVR SETUP* - 992 - RCVR - DVD/LD -
DVD/LD - SETUP* - Audio code
DVD/LD to CBL/SAT
SETUP* - 992 - CBL/SAT - DVD/LD -
DVD/LD - SETUP* - Cable/DBS code
RCVR to TV SETUP* - 992 - TV - RCVR - RCVR -
SETUP* - TV code
RCVR to VCR SETUP* - 992 - VCR - RCVR - RCVR -
SETUP* - VCR code
RCVR to DVD/LD SETUP* - 992 - DVD/LD - RCVR - RCVR -
SETUP* - DVD/LD Player code
RCVR to CBL/SAT
SETUP* - 992 - CBL/SAT - RCVR -
RCVR - SETUP* - Cable/DBS code
CBL/SAT to TV SETUP* - 992 - TV - CBL/SAT -
CBL/SAT - SETUP* - TV code
CBL/SAT to VCR SETUP* - 992 - VCR - CBL/SAT -
CBL/SAT - SETUP* - VCR code
CBL/SAT to DVD/LD
SETUP* - 992 - DVD/LD - CBL/SAT -
CBL/SAT - SETUP* - DVD or LD code
CBL/SAT to RCVR
SETUP* - 992 - RCVR - CBL/SAT -
CBL/SAT - SETUP* - Audio code
*NOTE: Here (*) you must hold SETUP until the Cinema 5’s
red light blinks twice.
PROGRAMMING THE MACRO KEYS
The Cinema 5 has two Macro keys (MACRO and MACRO2)
that allow the user to play back a series of keystrokes, at any
time, with the press of one key. For example, to set up a
sequence that will turn on your components and change the
components to the proper inputs:
1. Press and hold SETUP until the Cinema 5’s red
light blinks twice, then release SETUP.
2. Press 9 - 9 - 5. The Cinema 5’s red light will blink
twice.
3. Press and release one of the MACRO keys. This
will be the key that will play back the series of key-
strokes assigned to that key.
4. Begin entering the sequence of keystrokes, up to
15, that you wish to be played back when you
press the MACRO key. For example:
RCVR – POWER – TV – POWER – TV/VCR (To
change the input on the TV to VIDEO 1)
CBL/SAT – POWER.
5. Once your sequence is entered, press and hold
SETUP until the Cinema 5’s red light blinks twice.
Now, using the example as above, whenever the pro-
grammed MACRO key is pressed, the Receiver would power
ON, the TV will power ON and change the input to VIDEO 1
and then the Satellite would power ON.
Repeat steps 1 - 5 to then setup a second sequence on the
MACRO2 key.
VOLUME LOCK
Volume Lock allows the user to designate which component
will control the volume in the TV, DVD/LD and CBL/SAT
modes. To set the Volume Lock to the TV mode:
1. Press and hold SETUP until the Cinema 7’s red
light blinks twice, then release SETUP.
2. Press 9 - 9 - 3. The Cinema 5’s red light will blink
twice.
3. Press and release TV. The Cinema 5’s red light
will blink twice.
Now, whenever you press VOL , VOL or MUTE in the
VCR, DVD/LD and CBL/SAT modes your TV will control the