One for All ONE FOR ALL Universal Remote User Manual


 
Toshiba 0000
Tusa 0015
TV86 0063
Unika 0153, 0022, 0207
United Artists 0007
United Cable 0003
Universal 0153, 0022, 0056, 0191, 0207
Videoway 0250
Viewstar 0063, 0027, 0258
Zenith 0525, 0000, 0015, 0207, 0008
Zentek 0400
Setup Codes for Satellites
AlphaStar DBS 0772
Chaparral 0216
Echostar DBS 0775
ExpressVu DBS 0775
General
Instrument 0361, 0627, 0869
Hitachi DBS 0819
HTS DBS 0775
Hughes Network
Systems DBS 0749
Jerrold Primestar 0627
Jerrold 0361
JVC 0775
Magnavox DBS 0722, 0724
Memorex DBS 0724
Panasonic DBS 0701
Philips DBS 0722, 0724
Primestar 0361, 0627
Proscan 0566
RCA DSS 0566, 0143, 0855
Sony DBS 0639
Star Choice DBS 0869
STS 0210
Toshiba DBS 0790
Uniden DBS 0724, 0722
Zenith 0856
Programming the Cinema 5 to operate your DVD or
Laser Disc Player:
Locate the brand name of your DVD or Laser Disc Player in
the DVD or Laser Disc Player setup codes (starting below),
and write it in the space below.
DVD/LD Player Brand:________________________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first.You will use one of these codes to pro-
gram your Cinema 5 to operate your DVD or Laser Disc
Player as follows:
1. Turn on your DVD or Laser Disc Player and insert
a disc.
2. Press DVD/LD and release. Press and hold
SETUP until the Cinema 5’s red light blinks twice,
then release SETUP.
3. Enter the first four-digit DVD or Laser Disc Player
code listed for your brand. If performed correctly,
the red light will blink twice when entering the final
digit.
4. Aim the Cinema 5 at your DVD or LaserDisc
Player and press POWER. Your DVD or Laser Disc
Player should turn off. If it does not respond,
repeat steps 2-4, trying each code listed for your
brand until you find the one that works.
NOTE: If you have tried all the codes listed for your
brand and your DVD or Laser Disc Player does not
respond, try using ‘SEARCHING FOR YOUR
CODE”.
5. Your Cinema 5 is now programmed to operate your
DVD or Laser Disc Player. Write your DVD or Laser
Disc Player code in the boxes to the left for future ref-
erence.
Remember, to use Cinema 5 to operate your DVD or Laser
Disc Player, press the DVD/LD key first.
Setup Codes for DVD Players
JVC 0558
Kenwood 0534
Magnavox 0503
Mitsubishi 0521
Onkyo 0503
Panasonic 0490
Philips 0539, 0503
Pioneer 0525, 0571
Proscan 0522
RCA 0522
Samsung 0573
Sony 0533
Technics 0490
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503
Setup Codes for Laser Disc Players
Denon 0059
Mitsubishi 0059
NAD 0059
Pioneer 0059
Sony 0193, 0201
Programming the Cinema 5 to operate your Receiver/Tuner:
Locate the brand name of your Receiver/Tuner in the “Setup
Codes For Receiver/Tuners” section (starting below), and
write it in below.
Receiver/Tuner Brand:________________________________
The brands are listed in alphabetical order with the most
popular codes listed first. You will use one of these codes to
program your Cinema 5 to operate your Receiver/Tuner as
follows:
1. Turn on your Receiver/Tuner.
2. Press RCVR and release. Press and hold SETUP
until the Cinema 5’s red light blinks twice, then
release SETUP.
3. Enter the first four-digit Receiver/Tuner code listed
for your brand in the “Setup Codes For
Receivers/Tuners” section. If performed correctly,
the red light will blink twice when you enter the
final digit.
4. Aim the Cinema 5 at your Receiver/Tuner and press
POWER. The unit should turn off. If it does not
respond, repeat steps 2-4, trying each code listed
for your brand until you find one that works.
NOTE: If the unit still does not respond, try using
“SEARCHING FOR YOUR CODE”.
5. Your Cinema 5 is now programmed to operate
your Receiver/Tuner. Write your Receiver/Tuner
code in the boxes to the left for future reference.