Filter
Top Products
8 WWW.ONEFORALL.COM
Once you have Set-Up your ONE FOR ALL 1, you can blink back your
Set-up Code for future reference.
To blink out your television code:
1. Press and hold down MAGIC until the ONE FOR ALL
1 red light blinks twice (the red light will blink once
then twice).
2. Press 9 9 0. The red light will blink twice.
3. For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the
digit is „0“.
4. For the second digit of your four-digit code, press 2
and count all the red blinks. If there are no blinks,
the digit is „0“.
5. For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0“.
6. For the fourth digit of your four-digit code, press 4
and count all the red blinks. If there are no blinks,
the digit is „0“.
Now you have your four-digit code.
Code blink out
(To find out which code is currently programmed)
1 ……………………………………
■■ ■■ ■■ ■■
Quick Code Reference
Make sure you write down the code for your television in the
boxes below and in the battery compartment for future easy
reference.