Filter
Top Products
WWW.ONEFORALL.C OM 11
Problem & Solution
Problem:
Y
our brand is not listed
in the code section?
T
he ONE FOR ALL 4 does
not operate your
device(s)?
The ONE FOR ALL 4 is not
performing commands
properly?
P
roblems changing
channels?
Video not recording?
The ONE FOR ALL 4 does
not respond after
pressing a key?
The red light (LED) does
not blink when you press
a key?
Solution:
T
ry the search method on page 7.
A
) Try all the codes listed for
your brand.
B) Try the search method on
p
age 7.
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code listed
under your brand or start the
s
earch method over again to
l
ocate the proper code.
E
nter the program number
exactly as you would on your
original remote.
As a safety feature on your ONE
FOR ALL 4, you must press the
Record key twice.
Make sure you are using new
batteries and are aiming the ONE
FOR ALL 4 at your device.
Replace batteries with 2 fresh,
new “AA/LR6” alkaline batteries.
Trouble Shooting
URC-7740 TANGO 4 7 talen New:URC-7740 TANGO 4 7 talen New 29-05-2007 17:38 Pagina 11