One for All URC-7740 Universal Remote User Manual


 
8 WWW.ONEFORALL.COM
O
nce you have Set-Up your ONE FOR ALL 4, you can blink back your
S
et-up Code for future reference.
E
xample: to blink out your television code:
1. Press the TV key once.
2. Press and hold down MAGIC until the ONE FOR ALL
4
red light blinks twice (the red light will blink once
t
hen twice).
3. P
ress 9 9 0. The red light will blink twice.
4. For the first digit of your four-digit code, press 1 and
c
ount all the red blinks. If there are no blinks, the
digit is „0“.
5. For the second digit of your four-digit code, press 2
and count all the red blinks. If there are no blinks,
the digit is „0“.
6. For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0“.
7. For the fourth digit of your four-digit code, press 4
and count all the red blinks. If there are no blinks,
the digit is „0“. Now you have your four-digit
code.
Code blink out
(
To find out which code is currently programmed)
- To blink back the code for your other devices, press the appropriate
device key during step 1.
Device Type
1 ……………………………………
2 ……………………………………
3 ……………………………………
4 ……………………………………
Quick Code Reference
Make sure you write down the codes for your devices in the
boxes below and in the battery compartment for future easy
reference.
URC-7740 TANGO 4 7 talen New:URC-7740 TANGO 4 7 talen New 29-05-2007 17:38 Pagina 8