Filter
Top Products
13
SN 29343150 DV-L5E
Connecting to a TV
Before connecting
• Refer also to the instruction manual of the TV.
• When you connect the DVD Player to the TV, be sure to turn off the
power and unplug both units from the mains before making any
connections.
• Connect the DVD Player to the TV directly. If you connect the DVD
Player to a VCR, TV/VCR combination, or video selector, the playback
picture may be distorted as DVD videos are copy protected.
• Connect the plugs securely.
Incomplete
Insert completely
TV
: Signal flow
Be sure to set the TV Aspect after connection using
the Setup Navigator explained in “Setting Up the
Player” starting on page 16 or the function setting
menu explained in “Adjusting Audio and Video
Settings” starting on page 38.
DO NOT connect
the mains lead at
this time.
Connecting to a TV Using the Audio/Video
Connection Cable
If the TV or monitor has an S video input, make the S video
connection. The S video connection will provide higher
quality picture playback.
Notes
• If you make the S video connection, leave the yellow plug
disconnected.
• If the TV audio is monaural, leave the red plug disconnected.
S video connection cable
To S video input
Stereo audio/video connection cable
To audio/video inputs
Video
(Yellow)
L (White)
R (Red)
TV
■ Connecting to a TV Using the SCART
Cable
Connect the DVD Player and your TV using the supplied
SCART cable.
If the TV is compatible with S video signals
After completing the steps on page 15, set “Video Out” to “S
Video” using the menu explained in “Adjusting Audio and Video
Settings” starting from page 38. See page 43 for direct
information.
If an RGB monitor is connected to the DVD Player
After completing the steps on page 15, set “Video Out” to “RGB”
using the menu explained in “Adjusting Audio and Video Settings”
starting from page 38. See page 43 for direct information.
SCART cable
To AV CONNECTOR input terminal
Active subwoofer
(for powerful bass
sound)