Filter
Top Products
22
Warning: To prevent a shock hazard
when you replace the fuse, be sure the
VCP is turned off and its power is discon-
nected.
Follow these steps to replace the fuse.
1. Unscrew the fuse compartment cap
(
FUSE
) on the back of the VCP, then
remove the cap. The fuse stays in
the cap when you remove it from the
compartment.
2. Remove the old fuse and place a
new fuse in the cap. Then replace
the cap and screw it back into the
compartment.
THE FCC WANTS YOU TO
KNOW
Your VCP might cause TV or radio inter-
ference even when it is operating proper-
ly. To determine whether your VCP is
causing the interference, turn off your
VCP. If the interference goes away, your
VCP is causing the interference. Try to
eliminate the interference by:
• Moving your VCP away from the TV
or radio.
• Connecting your VCP to an outlet
that is on a different electrical circuit
from the TV or radio.
• Contacting your local Radio Shack
store for help.
If you cannot eliminate the interference,
the FCC requires that you stop using
your VCP.
16-419.fm Page 22 Tuesday, July 20, 1999 11:16 AM