Filter
Top Products
SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area.
You must use the remote control
for the this procedure.
NOTE:
Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select
the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the
channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE
FIRST TIME
1 Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a
standard AC outlet.
2 Turn on the TV/VCR
Press the POWER button to turn on the
TV/VCR.
3 Select "ENGLISH" or "ESPAÑOL"
Select "ENGLISH" or
"ESPAÑOL"=Spanish using the
F.FWD/B or REW/s button.
"[ ]" indicate the selected lan-
guage.
4 Begin auto preset
Press the PLAY/▲ or STOP/▼
button to point to "AUTO
PRESET".
Then press the F.FWD/B button.
The tuner scans and memorizes all active channels in
your area.
NOTES:
●
The TV/VCR distinguishes between standard TV
channels and cable channels.
●
If you want to play or record a video tape BEFORE
presetting the tuner, you must press the MENU
button. To preset the tuner again, see "CHANNEL
SET UP AGAIN" on page 13.
5 After scanning
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL K or L.
DELETING (OR ADDING)
CHANNEL
The channels you no longer receive or seldom watch can
be deleted from the memory. (Of course, you can add
the deleted channel into the memory again.)
1 Select "CHANNEL SET UP"
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to "CHANNEL
SET UP".
Then, press the F.FWD/B button.
2 Select "ADD/DELETE CH"
Press the PLAY/▲ or STOP/▼
button to point to "ADD/
DELETE CH".
Press the F.FWD/B button.
3 Enter the desired channel number
Press the PLAY/▲ or STOP/▼
button until your desired channel
number appears. (You can also
use the number buttons or the
CHANNEL ▲/▼ button to enter
it) (Example: CH8)
4 Delete (or add) it from (into) memory
Press the F.FWD/B or REW/s button. The channel
number changes to light red. The channel is deleted from
memory.
●
To delete another channel, repeat steps [3] and [4].
●
If you press the F.FWD/B or REW/s button again,
the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5 Exit the channel setup mode
Press the MENU button to returns to TV mode.
NOTE:
To confirm that channel(s) has been deleted or
added, press the CHANNEL ▲ or ▼ button.
– SET UP –
B
LANGUAGE
[ENGLISH] ESPAÑOL
AUTO PRESET
– SET UP –
LANGUAGE
[ENGLISH] ESPAÑOL
B
AUTO PRESET
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
B
ADD / DELETE CH (TV)
AUTO PRESET
08
ADD/DELETE
7L01
B5900-02
- 12 - EN