CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV programs,
movies, news, pre-recorded tapes with either a dialogue
caption or text display.
CAPTION mode:
By choosing the caption mode, you
can watch dramas, movies and news while
captioning the dialogues and the contents of news.
TEXT mode:
By choosing the text mode, you can watch
half screen text information if you want.
1-2:
You may get these captions or text information by
selecting either "1" or "2". Caption "2" is used, usu-
ally for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed
captions from high quality antenna, cable and VCR sig-
nals. Conversely, poor quality signals are likely to result
in caption errors or no captions at all. Common signal
conditions which may cause captions errors are listed
below:
●
Automobile ignition noise
●
Electric motor brush noise
●
Weak snowy reception on TV screen
●
Multiplex signal reception displaying picture ghosts
or airplane flutter.
●
Playback of poorly recorded or worn VCR tapes.
NOTE:
If the TV/VCR displays a black
box on the TV screen, this means
that the TV/VCR is set to the
TEXT mode. To clear screen, se-
lect [CAPTION1], [CAPTION2]
or [OFF].
Make sure ...
●
Use the remote control for this procedure.
●
TV/VCR power must be turned on.
1 Select "CAPTION"
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to
"CAPTION".
2 Select your desired caption menu
Press the F.FWD/B or REW/s
button until your desired caption
menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3 Exit the caption setting mode
Press the MENU button to return to TV mode.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Press the MENU button
to return to TV mode.
WHEN THE CLOSED CAPTION MODE
IS ON
The On-Screen Display will disappear after 5 seconds.
●
This is also true when the MUTE button is pressed,
and when the PAUSE/STILL button is pressed while
recording.
●
If there is a power failure of any kind, the unit will
retain its’ memory for this feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
B
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
B
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
7L01
B5900-02
- 18 - EN