Filter
Top Products
7
F.FWD button–
Press to rapidly advance the tape, or
to view the picture rapidly in forward during
playback mode. (Forward Search)
B button–
●
When setting program (for example: setting clock or
timer program), press to determine your selection
and proceed to the next step you want to input.
●
Press to determine setting modes from on screen
menu.
●
Press to select a mode from a particular menu.
(for example: LANGUAGE or USER’S SET UP)
8
REC button–
Press for manual recording.
OTR button–
Activates One Touch Recording.
(only on the TV/VCR)
9
RECORD indicator–
Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
10
Remote Sensor Window–
Receives the infrared
signals from the remote control.
11
CHANNEL
▲
/
▼
buttons–
Press to select the de-
sired channels for viewing or recording.
TRACKING function–
Press to minimize video
‘noise’ (lines or dots on screen) during playback
mode. (See page 19.)
12
VOLUME X / Y buttons–
Adjust the volume level.
13
POWER button–
Press to turn TV/VCR on and off.
Press to activate timer recording.
14
Cassette compartment
15
Number buttons–
Press to select desired channels
for viewing or recording. To select channels from 1
to 9, first press the 0 button and then 1 to 9.
+100 button–
When selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the "+100" button then press "2" and "5").
16
MENU button–
Press to display the main menu on
the TV screen.
17
DISPLAY button–
Display the counter or the current
channel number and current time on the TV screen.
(See page 16)
18
SPEED button–
Press to choose the desired
recording speed:SP/LP/SLP.
19
T-PROG. CLEAR button–
Press to cancel a setting of
timer program (See page 25).
COUNTER RESET button–
Press to reset counter to
0:00:00.
20
GAME button–
Sets the game mode and external
input mode at the same time. (See page 17.)
21
TIME SEARCH button–
Press to activate Time
Search mode.
22
PAUSE/STILL button–
Press to temporarily stop the
tape during the recording or to view a still picture
during playback.
23
MUTE button–
Mutes the sound. Press it again to
resume sound.
24
CHANNEL RETURN button–
Press to go back to the
previously viewed channel. For example, pressing
this button once will change channel display from 3
(present channel) to 10 (previously viewed channel),
and pressing it a second time will return from 10 to
3.
25
WAKE UP/SLEEP button–
Sets the Wake up or
Sleep Timer. (See page 26.)
26
Power cord–
Connect to a standard AC outlet.
27
ANT. terminal–
Connect to an antenna or CATV.
T
- REAR VIEW - [Fig.3]
8E21
B7916-01
- 9 - EN