Filter
Top Products
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
20
EN
RECORDING
TV/VCR SECTION
TO CORRECT A PROGRAM AFTERWARD
1 Press [POWER] to turn on the unit.
2 Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 19.
3 Press [
BB
] (or press [
ss
] to go back one step)
until the part you want to correct begins flashing,
then use
[
KK
/
LL
] to make the changes.
Press
[ENTER] to confirm.
4 Press [POWER] to set automatic timer recording.
TO CANCEL A PROGRAM
1 Press [POWER] to turn on the unit.
2 If recording is in progress, press
[STOP/EJECT C A] on the unit.
3 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
4 Use [
KK
/
LL
] to select a program you want to
cancel and press
[CLEAR].
5 Press [SET-UP] to exit the menu.
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1 Press [POWER] to turn on the unit.
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Press [REC] and use
[
KK
/
LL
] to select the desired
program.
4 Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
• When the recording is already in progress, each press
will shift forward the end time only.
• If you want to cancel while setting, press
[PAUSE
FF
]
on the remote control. The recording time returns to
the original time.
• When you shift forward the time schedule during
recording, the recording speed will be automatically
set to the SLP mode.
5 Press [ENTER] to complete the setting. Then
press
[SET-UP] to exit the menu.
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
• When the starting time is the same, the program set on
the highest position in the program list has priority.
• The illustration below demonstrates the sequence of
recordings.
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
T1200UA_EN.QX3 06.2.6 11:16 AM Page 20