Filter
Top Products
38
EN
1A23
Basic Operation
STB is capable of receiving analog (NTSC format)
and digital (ATSC format) broadcasts.
All available channels from any of these broadcast
sources can be tuned in using the CH o/p buttons
and number buttons on your remote control.
Each channel number consists of a main channel
number and a sub-channel number.
1 Turn the TV on and select the input to
which the STB is connected to.
2 Turn the STB on.
• The power indicator on the STB front panel will
blink and light up.
Remote:
3 Selecting a desired channel.
When using CH
oo
/
pp
buttons:
• Press CH o button to tune a higher channel
number.
• Press CH p button to tune a lower channel
number.
TIP:
Be sure to complete AUTOSCAN in SETUP
WIZARD or in the SETUP menu so that STB
receives all channels available to be watched (ATSC
and NTSC).