Filter
Top Products
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
Notes
●
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
●
Be sure to turn off the power to all components in the system before connecting another component.
●
Refer also to the Owner’s Manuals for the components to be connected to the DVD player.
●
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect
settings may generate noise distortion, and may also damage the speakers.
●
When set DOLBY DIGITAL to OFF and VIRTUAL 3D to ON for audio output in the setup mode and select
the audio source in a 5.1 channel Dolby Digital surround format, the audio is muted.
DIGITAL AUDIO OUT
VIDEO OUT AUDIO OUT
COAXIAL
S VIDEO R L
(PCM/BITSTREAM)
To COAXIAL DIGITAL
AUDIO INPUT jack
A/V-compatible
or
wide screen TV
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To VIDEO INPUT jack
or
To S-VIDEO
INPUT jack
To VIDEO OUT jack
To S-VIDEO OUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
9F21
E5420-01
- 11 - EN