Filter
Top Products
96
Other operations
First:
To cue or review picture during playback (Picture Search):
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP
mode only)
To freeze the picture on TV screen during playback (Still mode):
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C-RESET button.
To playback in slow motion:
Press SLOW button during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
CHANNEL K/L or CHK/CHL buttons.
When you playback a tape recorded in Hi-Fi stereo:
Press AUDIO button on the remote control to select Hi-Fi or MONO
for playback sound mode.
•If you have connected a stereo TV to this unit, select “Hi-Fi”.
•If you have connected a monaural TV to this unit, select “MONO”.
VCR
VCR
VCR
VCR
VCR
Note
•Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the tape and the video head.
•To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
VCR functions
Search (cont’d)
Hi-Fi
Your Selection
Type of recorded tape
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded second
audio program
Hi-Fi tapes
recorded main
audio program
MONO
Monaural
L+R
Main audio
program
Second audio
program
Monaural
R-channelL-channel
R
Main audio
program
Second audio
program
Monaural
L
Main audio
program
Second audio
program
Time search
Note
• These functions are not avail-
able during recording.
•Press STOP button to stop the
search.
•
If the end of the tape is reached
during a Search, this unit will cancel
the search and rewind the tape.
POWER
REC SPEED
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C-RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
3
2
This feature allows you to go to a
specific point on a tape by entering
the exact amount of time you wish
to skip in order to reach the
point.
First:
1
Press SEARCH MODE button
repeatedly so that the Time
search menu appears.
2
Enter your desired time to
skip using Number buttons
with in 30 seconds.
3
Press g/h buttons to
start time search.
If you want to go in the forward
direction, press
g
button.
If you want to go in the reverse
direction, press
h
button.
After time search, the unit will play
the tape automatically.
TIME SEARCH
2:50
VCR
VCR
VCR
VCR
VCR
E9410UD(EN/SP)v1.qx3 04.3.22 10:02 AM Page 96