Sylvania LC155SC8 Flat Panel Television User Manual


 
14
EN
I
NITIAL SETTING
Note:
If you connect the cable system directly, contact the CATV
installer.
If you press [POWER] or [SETUP] during auto channel scan,
the setting will be canceled.
When no channel can be received by auto channel scan,
“NO TV SIGNALS” will be displayed on the TV screen.
Channel settings will be saved even if the power fails.
If you have Spanish or French menus and need English,
press [SETUP]. Use [Cursor K/L] to select “IDIOMA”
or “LANGAGE”. Press [ENTER] to select “ENGLISH”. Press
[SETUP] to remove the main menu.
With regard only to the digital channel, even after the
scanning is complete if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.
Language Selection
You can choose English, Spanish, or French as your on-screen language.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K /L] to select “LANGUAGE”, then press
[ENTER] repeatedly to change the setting.
e.g.) digital TV mode
or
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
DTVCC
[ENGLISH]
[ESPAÑOL]
[FRANÇAIS]
3
Press [SETUP] to exit.
5