33
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION
CONNECTION
INITIAL SETTING DVD SETTING INFORMATION
TROUBLESHOOTING
Note:
• Repeat setting (except “ALL“) will be cleared when moving to
another title, chapter, track/file or folder.
• During programmed playback, repeat setting will be effective
for the tracks/files in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• Repeat A-B playback does not function during other repeat
mode.
• To cancel point A, press [CLEAR] at step 2 in “Repeat A-B
Playback“
• Stopping playback will cancel repeat A-B playback.
Programmed Playback
CD
MP3
You may determine the order in which tracks/ les will be play back.
1
In stop mode, press [MODE] repeatedly until the
“PROGRAM” menu appears.
e.g.) audio CD
PROGRAM
ENTER
PLAY
CLEAR
CD-DA TOTAL 0:00:00
1/ 1
1/ 3
T 1 3:31
T 2 4:28
T 3 4:19
T 4 3:58
T 5 4:12
T 6 4:02
T 7 3:55
T 1 3:31
2
Use [Cursor K / L] to select a desired track/file, then
press [ENTER] to store.
• Additional tracks/files may be on other screens. Use
[Cursor K/ L] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks/
files you wish to play back in the program.
or
PROGRAM
ENTER
PLAY
CLEAR
CD-DA TOTAL 0:08:22
1/ 1
3/ 3
T 15 3:18
T 16 4:24
ALL CLEAR
T 4 3:58
T 16 4:24
T 16 4:24
• Up to 99 tracks/files can be ordered.
• If 8 or more tracks/files were in a program, use
[SKIP H / G] to see all the tracks/files.
3
Press [PLAY B] to start programmed playback.
5
Note:
• Press [CLEAR] to erase the last track in the program if you
make an error.
• To erase all programmed tracks/files at once, select “ALL
CLEAR’’ and press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as
follows:
- Pressing [STOP C] once: The track/file will be in the resume
standby mode. Next time you press [PLAY B], the playback
will resume from the point where it is stopped in the
programmed playback. (For MP3 file, playback will resume
from the beginning of the current file.)
- Pressing [STOP C] twice: Resume mode will be canceled. Next
time you press [PLAY B], playback will restart from the first
track/file in the original order. However, your programmed
playback can be restarted when you follow the above steps.
(Your programs are still stored until either the disc is ejected
or the unit is turned off.)
On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• To repeat the current track/file in the program, follow the
steps 1 and 2 in “Repeat Playback“ on page 32 and select
“
TRACK“.
• To repeat the entire program, follow the steps 1 and 2 in
“Repeat Playback“ on page 32 and select “
ALL“.
• Turning off the unit or ejecting the disc will erase the
program.
• You cannot use [the Number buttons] to select another
track during programmed playback. Use [SKIP
j
/
i
] to
select other tracks/files in the program.
• You cannot combine random playback with programmed
playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in
“PROGRAM “ menu.
Random Playback
CD
MP3
This function shu es the playing order of tracks/ les instead of playback
in the sequence.
1
In stop mode, press [MODE] repeatedly until
“RANDOM” menu appears.
e.g.) audio CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
2
Press [PLAY B] to start random playback.
Note:
• To repeat the current track/file in the random mode, follow
the steps 1 and 2 in “Repeat Playback“ on page 32 and select
“ TRACK“.
• To repeat the entire random selections, follow the steps 1 and
2 in “Repeat Playback“ on page 32 and select “
ALL“.
• Random playback will be kept until you press [STOP C].
5