Filter
Top Products
–
39
–
EN
01A11
SEARCH FUNCTION
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific Track.
Using the Number buttons on the remote control
1 Press the Number buttons to enter the
desired Track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.
Using the SEARCH MODE button
1 Press the SEARCH MODE button.
¡The track search display appears.
2 Within 30 seconds, select a desired track
number using the Number buttons on the
remote control.
¡For single digits press 0 first.
¡Playback will start at the selected track.
Using the SKIP
HG
buttons
During playback, press the SKIP G button to move
the next track. Press it repeatedly to skip subsequent
tracks. Press the SKIP H button to go back to begin-
ning of the current track. Press it repeatedly to go to
the previous tracks.
¡If the SKIP button is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
NOTE
¡The SKIP HGbuttons are not available when
playback is stopped.
CD
TITLE / CHAPTER SEARCH
1 Press the SEARCH MODE button once for
the Chapter search, twice for the Title
search during playback.
2 Enter the desired chapter/title number using
the Number buttons on the remote control.
¡Playback will start at the selected Chapter or Track.
¡Press the CLEAR button to erase the incorrect input.
¡For single digits press 0 first.
DVD-V
/2
TIME SEARCH
1 During playback, press the SEARCH MODE
button three times (CD: twice) to display the
Time Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the Number buttons on the
remote control.
¡Playback will start at the specified time.
¡Press the CLEAR button to erase the incorrect input.
CD
DVD-V
MARKER SETUP SCREEN
Use markers to memorise your favorite places on a
disc.
1 Press the SEARCH MODE button four times
(CD: three times) during playback.
¡The display screen and Markers will appear on the
TV screen.
2 Press the Arrow buttons (s / B) to select 1,
2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “- :
- - : - -” appears in the display.
3 When reaches the desired point, press the
ENTER button.
¡The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press the
SEARCH MODE button four times (CD: three
times) during playback and the Arrow but-
tons (
s/ B) to choose the desired marker,
then press the ENTER button.
NOTES
¡Opening the disc tray or turning off the power or
select AC at step 2 and press the ENTER button will
erase all Markers.
¡To clear a marker, using the Arrow buttons (s/ B
)
,
position the cursor on to the marker number to be
cleared and press the CLEAR button.
¡You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN but-
ton to exit.
CD
DVD-V
TD945_955UF(P36-52).QX33 04.7.30 2:18 PM Page 39