Filter
Top Products
- 14 - EN
1C29
ANT.
L
AUDIO OUT
R
COAXIAL
1
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Receiver with
Dolby Digital
decoder
[Fig. 8]
CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER
If using this TV/DVD/VCR to play a DVD disc, the TV/DVD/VCR outputs DOLBY DIGITAL Data stream
from its COAXIAL digital audio out jack. By hooking the player up to a receiver with Dolby Digital decoder,
you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as
enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR.
•
If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the
setup mode. (See page 45 to set DOLBY DIGITAL to ON.)
•
Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output
in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may
also damage the speakers.
•
Only DVD audio is available using the COAXIAL digital audio out jack.
•
For TV and VCR audio sound, please refer to “CONNECTING TO A STEREO SYSTEM” section on page
13). You will need to use these connection in addition to the above to enjoy TV and VCR sound through the
same receiver.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
TD945_955UF(P01-35).QX33 04.7.30 2:17 PM Page 14