Filter
Top Products
–
11
–
EN
0C28
CONNECTING TO FRONT A/V INPUT JACKS
When you watch a program recorded on another
source (VCR video camera Video game system), use
the audio/video input jacks on the front of the
TV/DVD.
Connect the audio/video output
jacks of the source to the AUDIO
L/R and VIDEO jacks of this
TV/DVD. Then press SELECT until
"AUX" appears on the screen.
NOTE:
•
When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
distributed in both L and R channel equally.
VIDEO L–AUDIO–R
[Another source]
To the
audio out-
put jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
[Front of the TV/DVD]
AUX
[Fig. 5]
CONNECTING TO AN AMPLIFIER/RECEIVER EQUIPPED WITH
DIGITAL INPUT JACK (DVD, CD, MP3 sound only)
Use an audio coaxial digital cable available at retail stores for the audio connections.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before making connections.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion and may also damage the speakers. (See page 28 to set DOLBY
DIGITAL to OFF.)
•
This will only allow 2-channel DVD sound to be listened to on the amplifier.
COAXIAL
ANT.
Amplifier/receiver equipped with
digital input jacks
To coaxial digital
audio input jack
To COAXIAL digital audio out jack
(only DVD audio out)
[Fig. 6]
T8055UF(EN).qx3 04.6.29 7:10 PM Page 11