Filter
Top Products
–
22
–
EN
0C28
TRACK SEARCH
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
Using the number buttons on the remote control
1 Press the number buttons to enter the
desired track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.
Using SEARCH MODE
1 Press SEARCH MODE.
¡The Track search display appears.
2 Within 30 seconds, select a desired track
number using the number buttons.
¡For single digits press 0 first, if the total track of the
disc is more than 10 tracks.
¡Playback will start at the selected track.
Using SKIP
HG
During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping the
track(s).
NOTE
¡SKIP HGis not available when playback is
stopped.
MP3CD
TITLE / CHAPTER SEARCH
1 Press SEARCH MODE once for the Chapter
search, twice for the Title search during
playback.
2 Enter the desired chapter/title number using
the number buttons.
¡Playback will start at the selected chapter or title.
¡Press the CLEAR button to erase the incorrect input.
¡For single digits press 0 first, if the total chapter or
title of the disc is more than 10.
DVD-V
_/2
TIME SEARCH
1 During playback, press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the number buttons.
¡Playback will start at the specified time.
¡Press CLEAR to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0
-
:
- -
”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD
DVD-V
SEARCH FUNCTION
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
¡The display screen and Markers will appear on the
TV screen.
2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “
- - - -
:
- -
:
- -
”
appears in the display.
3 When you reach the desired point, press
ENTER.
¡The title or track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback and Arrow (
s/ B) to choose the
desired marker, then press ENTER.
NOTES
¡Opening the disc tray or turning off the power or
selecting AC at step [2] and pressing ENTER will
erase all Markers.
¡To clear a marker, using Arrow (s / B
)
, position the
cursor on to the marker number to be cleared and
press CLEAR.
¡You can mark up to 10 points.
5 Press SEARCH MODE or RETURN to exit.
CD
DVD-V
T8055UF(EN).qx3 04.6.29 7:10 PM Page 22