Packard Bell 160 DVD Player User Manual


 
-
13
PICTURE SWING
• Relocate the unit further away from possible interference or emission source (e.g. Radio, Power Amplifier, radiator
etc.).
NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED
• Check to see if the program requires another disc to be loaded.
• Reset by unplugging the player from the power, then connect the power again.
THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL
• Aim the remote control directly at the sensor on the front of the player.
• Avoid all obstacles which may interfere with the signal path.
• Inspect or replace the batteries.
NO SOUND
• Check audio connections.
• If using a Hi-Fi amplifier, try another sound source.
• Clean the disc.
• Check if the disc is defective by trying another disc.
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections
• Check the Digital Out menu to make sure that the digital output is correctly set.
• Check if the audio format of the selected audio language matches your unit capabilities.
YOU HAVE FORGOTTEN THE PASSWORD
• Under no disc condition, press Number Key 7, Number Key 6, Number Key 4, Number Key 1 and Number 8 on
Remote Control in order.
Specifications
Supply voltage: AC 230V~
Frequency: 50Hz
Power: 15W
6985590000-DVX-160-UG.book Page 13 Friday, March 24, 2006 6:10 PM