Filter
Top Products
the upper comer of the screen for 4 seconds. Press AV/TV button again to return TV
mode, the original channel will be displayed in the upper right comer of the screen.
Set to TV mode when receiving or recording TV program.
AV CONNECTOR
This TV set is equipped with AUDIO/VIDEO input jacks and AUDIO output jack for your
desired equipment to be connected.
Connect the TV and VCR by the cables as Fig. 1
Fig.1
Select the VIDEO mode by press the TV/AV button on the Remote Control Unit. The
"VIDEO" will display on the screen, now you can now watch the VCR programs.
AUDIO OUT FUNCTION:
Connect this output to the AUX or MONITOR INPUT of an external amplifier or receiver.
EARPHONE
In the deep night, you can receive the TV sound by earphone, not to disturb others. Insert
the plug to the earphone sorket on the back of the cabinet. The speaker cut off automatically
when the earphone is inserted.
DEGAUSSING
The set supplys a munual degaussing function. Push the DEGAUSS button on the back of
the cabinet, then loosen it, repeat this action for serveral times. The set can be desgaussed
thoroughly. External degaussing is necessary if the munual degaussing ineffective.
NOTE: The interval between every press action should be more than 10 second, otherwise it
will be magnetization.
10
.
.
.
.