Filter
Top Products
Auto Search
Enter the Program menu and select
Auto item.
Press VOL+ or VOL- button and the
TV set starts Auto Channel Preset.
All Active channels will be preset and
stored into the memory automatically.
After presetting, the TV will stop at
the last channel program. During the
process of Auto channel preset, pressing the MENU or CH+/-
button will stop the process.
Note:
Before you start Auto Search, we strongly recommend you to
set a proper Sound System according to your local area.
Please refer to the steps of Sound System setting on page 16.
Manual Search
Use manual search function if desired channels cannot be
preset or if you would like to preset channels to specific
position numbers one by one.
Please Select a channel number with
digital buttons or CH+/- buttons. You
can also enter program menu, select
Display item and adjust with VOL+/-
button manually to select the desired
channel number (from 0~254).
14
1. Press MENU button four times to display Program menu.
2. Press CH+/- button to select item.
3. Press VOL+/- button to confirm or adjust the selected item.
Tuning in
In Program menu, please select Manual item and start
manual search with VOL+/- buttons. Pressing VOL+, the set
searches towards higher frequency; Pressing VOL-, the set
searches towards lower frequency. The search stops when a
program is found and the is program will be stored in the
specified position number.
You can use Band selection to quicken search process if you
know which band your desired program is located in. The band
switches among VHF-L, VHF-H and UHF.
Repeat the above steps if you want to store another program in
other position number.
2
2
3
3
HELP
1
2
1
3