Please enter the SafeMode menu and
select OnSearch item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to On, next time you turn
on by Power Switch, the TV set searches
program and set system automatically
(please make sure that the antenna connection is OK before you
turn on). Once the OnSearch is fulfilled successfully, this item will be set
to Off automatically so that the set does not search program when you
turn on by Power Switch next time.
Please enter the SafeMode menu and
select OnDemo item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to On, next time you turn
on by Power Switch, the TV set
demonstrates menu operation for about 1
minute first.
Once the OnDemo is fulfilled successfully, this item will be set Off.
If you want to set a new password,
Please enter the SafeMode menu and
select Password item.
Please input 4-digit password by using
the 0-9 digit buttons first, then the set asks
you to input again and you should input the
same password again as you input first
time. If you do so successfully, the new
password will be accepted and the screen
displays OK. Otherwise, the set asks you
to repeat the above steps.
26
Safe Mode
Setting PassWord item
Setting OnSearch item
Setting OnDemo item
Notes:
If you forget your password and fail to enter
the SafeMode menu, you can use the
super password as "5 4 3 2" to enter. Now
please set a new password and remember
it.
2
1
3
2
2
3
3
HELP
1
0-9
digit
buttons