Filter
Top Products
BOTTOM VIEW
CONTROL
DVI D-SUB
COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT
AV INPUT
HEADPHONE RF SVHS
Connections
12
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-video terminal source supports it.
When you use S-video terminal, the source menu displays SV instead of AV.
The S-Video is prior to Video terminal when they are connected at the same time.
To play VCR
1. Turn on your PDP TV, press SOURCE button on the remote
control.
2. Press VOL+/- to select AV (VIDEO) and press ENTER to confirm.
3. Turn on your VCR, insert a videotape and press the Play button.
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R)
Rear of the VCR
S-video
cable
Audio
cable
Video
cable
or
Connect a VCR
VCR
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Cautions before connecting
VIDEO
source
A D C1 C2 AV TV