Filter
Top Products
Basic Operations
21
Changing Channels
Using the Channel Buttons (CH or CH )
Press the CH or CH to change channels.
When you press the CH or CH , the unit changes channels in sequence. You will see all the channels that the
unit has memorised.
You will not see channels that were erased, not memorised or unavailable.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel:
Input the channel using the 0-9 number buttons directly and then press ENTER or wait for 3 seconds.
To select a two-digit channel:
Input the channel using the 0-9 number buttons directly and then press ENTER or wait for 3 seconds.
To select a three-digit channel:
Input the channel using the 0-9 number buttons directly.
Note:
Be sure to enter the channel within 3 seconds.
When you use the number buttons. You may directly select channels that were erased.
Using the RETURN button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL- and VOL+)
Press the VOL+ or VOL- to increase or decrease the volume.
Using the Mute
Using the MUTE button
At any time, you can temporarily turn off the sound using the MUTE button.
Press the MUTE button and the sound turns off.
To turn mute off, press the MUTE button again, or simply press either the VOL- or VOL+.
2
1