Palsonic PDP4250 Flat Panel Television User Manual


 
Basic Operations (continued)
22
Select input source signal
Press the SOURCE button to access source menu.
Press VOL+ or VOL- to select a desired input channel.
Press ENTER to confirm and the unit display signal from the
selected input channel.
A--------VGA, select signal from VGA (5-pin D-sub) terminals.
D--------DVI, select signal from DVI terminals.
C1------YCbCr1, select signal from YCbCr1 terminals.
C2------YCbCr2, select signal from YCbCr2 terminals.
AV------VIDEO (S-VIDEO), select signal from S-Video or Video terminal.
The S-Video is prior to Video terminal when they are connected at the same time.
TV------Select TV signal.
3
2
1
settings
right/left to change language
audio format
video format
language
menu background
BG
AUTO
English
opaque
Note:
This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the
screen displays YCbCr detected on the bottom-right corner. Similarly, if the component video terminals are
Y, Pb, Pr, the screen displays YPbPr detected on the bottom-right corner.
Selecting a MENU language
Press MENU to display the menu main page.
Press VOL+/- to display settings menu page.
Press CH to select language item.
Press VOL+/- to select an OSD language.
4
3
2
1
Note:
In some models, there may be only one menu language available. In this case, the menu language may not be
adjusted by the user.
VGA
source
A D C1 C2 AV TV