Filter
Top Products
Installation
9
Connecting External Device
Notes about connection
1. Carefully check the terminals for position and type before making any connections.
2. Loose connectors will result in image or colour problems. Make sure that all connectors are
securely inserted into their terminals.
3. When connecting an external device, turn off the power of the main unit first to prevent any possible
damage.
4. Please refer to the instruction manual of the equipment to be connected as well.
Composite Video signal connection
Connect the composite video signal terminal on the TV to the output of AV equipment through
composite cable.
If you select the video signal, please set the input signal source of LCD-TV to AV1/AV2 mode.
Note:
Composite video signal is the most common signal, but the picture quality is not very good.
S-VIDEO Signal Connection
Connect the S-video terminal on the TV to the output of AV equipment through S-video cable.
If you select S-video signal, please set the input signal source of LCD-TV to SVIDEO mode.
To audio outputs
Note:
S-Video is a signal format which transfers the colour and bright of the picture respectively. The
picture quality is better than composite signal.
To video input
To audio outputs
To S-VIDEO output
VCR, DVD etc.
Yellow (video)
White (audio, L)
Red (audio, R)
W
Y
R
VCR, DVD etc.
W
Y
R
W
Y
R
W
Y
R
AUDIO
To audio inputs
To video output
To video input
To audio inputs
W
R
W
R
To audio inputs
To S-VIDEO input
White (audio, L)
Red (audio, R)
W
R