Filter
Top Products
Operations In RGB/YPbPr Mode
19
Select RGB/YPbPr mode
Press the SOURCE button on the unit or button on the remote control.
The screen displays the menu shown as right.
Press UP/DOWN to highlight the RGB or YPbPr item. Press LEFT/RIGHT
or wait about 4 seconds and the signal source is selected.
PC Signal Format
Connect VGA input and be sure that there is VGA input signal. Adjust the
resolution on your PC to obtain a proper picture.
Note:
The resolution of the LCD panel is 1280 x 768; any higher Resolution output from your PC Video
card might distort the image.
Auto Adjusting
When VGA signal format is changed or when you switch to RGB mode from another source, the unit
adjusts frequency and phase automatically to obtain the best display. During the process of auto
correction, the screen displays Analog RGB Acquiring Signal, and all buttons on the set and on
the remote control do not work until this process is finished.
When the set displays some nonstandard VGA signals and can not adjust the picture to the best
status by itself, you can adjust it again by pressing the AUTO button on the remote control.
Adjusting Brightness/Contrast
Access the Picture Setting menu.
Press UP/DOWN to select brightness or contrast item.
Press LEFT/RIGHT to adjust the selected item.
Setting Color Temperature
Access the Picture Setting menu.
Press UP/DOWN to select color temp item.
If you want to change the value of the user mode, set color temp to
user first, then select customer temp setting item, and press
LEFT/RIGHT to access the sub-menu.
Press UP/DOWN to select the item and press LEFT/RIGHT to adjust
it. The value you set will be stored.
Press LEFT/RIGHT to switch the color temperature between 5000K
7300K, 9300K and User.
1
2
3
1
2
1
2
3
4
5
Item
Function
Notes
brightness
contrast
Adjust the brightness of the picture.
Adjust the contrast of the picture.
Adjusting the picture under
RGB mode, will not affect
the display settings in the TV
& AV mode
brightness
contrast
color temp 5000K 7300K 9300K user
customer temp setting
50
60
brightness
contrast
color temp 5000K 7300K 9300K user
customer temp setting
50
60