Filter
Top Products
2
Dear Customer
Thank you for purchasing this Panasonic Video
Cassette Recorder.
We strongly suggest that you carefully study
the Operating Instructions before attempting to
operate the VCR, and that you note the listed
precautions.
Press POWER Í/I (VCR Í) to switch the VCR
from on to standby mode or vice versa. In
standby mode, the VCR is still connected to the
main AC power.
FCC NOTE:
This equipment has been tested and found
to comply with Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. If this equipment does
cause or receive interference, which can be
determined by turning equipment off and on,
the user is encouraged to try to correct the
interference by one of the following
measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the
equipment and receiver.
≥Connect the equipment into an outlet on a
circuit different circuit from that to which the
receiver is connected.
≥Consult the dealer or an experienced radio/
TV technician for help.
FCC Caution: Any changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate this equipment.
Trade Name: Panasonic
Model No.: AG-1350P
Responsible Party:
Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Broadcast & Television Systems
Company 1-800-524-1448
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inteference
received, including interference that may
cause undesired operation.
AUTO CHANNEL SET
PROCEEDING
END : MENU
2
Plug in Auto Tuning
Setting image illustration
TV
1 Connect the
Antenna
cable.
2 Connect the
AC power
cord.
3 Press POWER
Í/I button.
Plug in Auto
Tuning is
completed.
All broadcasting stations that can be received in the area are automatically tuned and stored in
memory.
≥Do not turn off the VCR halfway. (See pages 10–13.)
Antenna
On Screen display
ACCESSORIES
1 pc. Infrared Remote Controller
1 pc. Coaxial Cable
1 pc. AC Power Cord
2 pcs. “R6” size Batteries