Filter
Top Products
27
Advanced Operations
To Activate the Auto SP/EP Change
Function:
Press SPEED to select A.
≥Every time you press SPEED, the indication
changes in the following order:
SP>EP>A>SP
Checking a Timer Program
≥The VCR must be turned on, or the timer
recording indicator “Á” lit.
≥Confirm that the TV is on and the VCR
viewing channel is selected.
1 Press PROG./CHECK
twice.
≥Every time you press
PROG./CHECK, the
program shifts below.
2 Press VCR/TV to select
the VCR mode.
3 Press 1 to display the
Category. (When JET
NAVIGATOR is set to
ON.) Press 1 again to
make the previous
display appear.
Cancelling a Timer Program
≥The VCR must be turned on, or in timer
recording standby mode.
≥Confirm that the TV is on and the VCR
viewing channel is selected.
1 Press PROG./CHECK twice.
2 Press VCR/TV to select
the VCR mode.
3 Press PROG./CHECK
repeatedly.
4 Press RESET/CANCEL.
Note:
≥If timer recording is not completed (due to
insufficient tape or cancellation by the user),
the programed timer recording data will be
cancelled from the memory by 4 A.M. two
days later.
However, if the timer recording function is
activated at that time, the programed timer
recording data will not be cancelled.
CHDATE ON OFF
A2 20:02 21:3027TH
CATEGORY:
1
DATE CH ON OFF
27WE 2 20:02 21:30 SP
SU-SA125 10:30 11:00 A
SU 14 15:00 16:00 SP
–––– –– ––:–– ––:––
28TH A2 20:02 21:30 SP
30SA 4 19:10 19:55 EP
–––– –– ––:–– ––:––
–––– –– ––:–– ––:––
END:MENU
SELECT:
1
1
2
3
4
5
6
7
8
DATE CH ON OFF
27WE 2 20:02 21:30
SU-SA125 10:30 11:00
SU 14 15:00 16:00
19TU 5 22:15 23:30
28TH A2 20:02 21:30
30SA 4 19:10 19:55
–––– –– ––:–– ––:––
–––– –– ––:–– ––:––
END:MENU
SELECT:
1
1
2
3
4
5
6
7
8
DATE CH ON OFF
27WE 2 20:02 21:30 SP
SU-SA125 10:30 11:00 A
SU 14 15:00 16:00 SP
19TU 5 22:15 23:30 EP
28TH A2 20:02 21:30 SP
30SA 4 19:10 19:55 EP
–––– –– ––:–– ––:––
–––– –– ––:–– ––:––
END:MENU
SELECT:
1
1
2
3
4
5
6
7
8