Filter
Top Products
53
Setup menus
The underlined items indicates the initial setting.
USER menu
<V BLANK>
No./Item Description No./Item Description
Sub-screen
801
ADD LINE 50
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000 OFF
:No signals are recorded on
additional lines.
0001 YC422
:The 422 mode signals are
recorded on 2 lines.
0002 Y4_B/W
:Only the Y signal is recorded on
4 lines directly.
0003 Y4_BPF
:Only the Y signal is recorded on
4 lines after it has been
separated from the C signal.
0004 C4
:Only the C signal is recorded on
4 lines.
<Notes>
OWhen a setting from “0001 (YC422)” to “0004
(C4)” is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording lines can be selected.
To return from the sub-screen, press the STOP
button again.
OThe setting takes effect when the system
format is 50 Mbps.
For selecting the additional line where the
signals are to be recorded.
[525i system] [625i system]
0000 10L 0000 7L
::::
0012 22L 0015 22L
0013 263L 0016 320L
0014 273L : :
: : 0031 335L
0025 284L 0032 623L
0026 525L
SD955B
01
REC LINE2
For selecting the additional line where the
signals are to be recorded.
[525i system] [625i system]
0000 10L 0000 7L
::::
0012 22L 0015 22L
0013 263L 0016 320L
0014 273L : :
: : 0018 322L
0016 275L ::
: : 0031 335L
0025 284L 0032 623L
0026 525L
SD955B
02
REC LINE3
For selecting the additional line where the
signals are to be recorded.
[525i system] [625i system]
0000 10L 0000 7L
::::
0003 13L 0003
10L
::::
0012 22L 0015 22L
0013 263L 0016 320L
0014 273L : :
: : 0031 335L
0025 284L 0032 623L
0026 525L
<Note>
This menu item is not displayed when setting “1”
has been selected as the additional line mode.
SD955B
03
REC LINE4
For selecting the additional line where the
signals are to be recorded.
[525i system] [625i system]
0000 10L 0000 7L
::::
0012 22L 0015 22L
0013 263L 0016 320L
0014 273L : :
: : 0019 323L
0017 276L
::
: : 0031 335L
0025 284L 0032 623L
0026 525L
<Note>
This menu item is not displayed when setting “1”
has been selected as the additional line mode.
SD955B
802
TELETEXT
SEL
For selecting the type of teletext signals to be
recorded.
0000 MOJI
:MOJI system
0001 NABTS
:NABTS system
<Notes>
OThis setup menu is not displayed in the 625i
system.
OVITC signals are often mistakenly detected as
teletext signals when the NABTS system has
been selected.
If this happens, select MANU as the setting for
setup menu No. 803 (TELETEXT DET), then
select the line for teletext signals.