Filter
Top Products
Menu selection
12 (E)
HDD screen
HDD Verify START OK?
YES NO
1
On this screen, some data is saved into a part of the hard
disk drive’s memory that is free and then loaded to check
that the drive is working properly.
<Note>
When no clips have been recorded, it takes about 80 min-
utes to check that the hard disk drive is working properly.
END screen
All the unit’s operations are shut down on this screen.
1.
In the MENU mode, press the [1](right) key to move the
cursor to END (shutdown).
2.
Press the SET key.
4.
Press the SET key.
3.
The following message now appears.
Select YES.
<Note>
Keep pressing both the SHIFT key and the [2] (down)
key for more than 2 seconds and a shutdown confirma-
tion message will appear on END screen of this unit.
5.
The following message now appears.
6.
Upon completion of shutdown, the following message
appears.
7.
Set the power switch to OFF.
Please turn off
Power switch!
[END]
1 YES NO
[END] 39
Wait a moment......