Panasonic AJ-RC5 Universal Remote User Manual


 
E-3
Parts and Their Functions
Operation panel
5
9
VTR WARNING indicator
This indicates that an error has occurred in the VTR’s operation.
6
STOP/S3 button
VTR operations: The button serves as the VTR’s STOP button.
Scene file operations: The button serves to select or release scene No.3 of the scene files.
PLAY/S4 button
VTR operations: The button serves as the VTR’s PLAY (playback) button.
Scene file operations: The button serves to select or release scene No.4 of the scene files.
<Note>
For details on the scene file operations, refer to the section entitled “Scene File Operations”
(page E-9).
8
9
2
3
4
6
7
1
5
VTR/SCENE
VTR WARNING
START/STOP
28
FFREW
S1 S2
SAVE
PLAY
REC CHK
STOP
S3
AWB
W.BAL
CAM GAIN
AUTO
KNEE
S4
LOAD
VTR
REC
ONLY
VTR ON
SCENE
1
VTR/scene enable switch
Depending on this switchs position, the
functions of the operations performed
using buttons 3 to 8 are switched.
REC ONLY: The VTR operations (7
only) performed using the
unit take effect.
VTR ON: All VTR operations (3 to 8)
take effect.
SCENE: The scene file operations
(functions indicated below
buttons 3 to 8) are
selected.
2
VTR enable indicator
This comes on when the 1 VTR/scene enable switch has been set to REC ONLY or VTR ON.
7
REC CHK/LOAD button
VTR operations: The button serves to display the VTRs recording status.
Scene file operations: The button serves as the scene file LOAD button.
START/STOP / SAVE button
VTR operations: The button serves to start or stop the VTRs REC (recording)
operations. When the
1
VTR/scene enable switch has been set to
REC ONLY, all VTR operations except those initiated by this button do
not take effect.
Scene file operations: The button serves as the scene file SAVE button.
FF/S2 button
VTR operations: The button serves as the VTRs FF (fast forward) button.
Scene file operations: The button serves to select or release scene No.2 of the scene files.
4
3
REW/S1 button
VTR operations: The button serves as the VTRs REW (rewind) button.
Scene file operations: The button serves to select or release scene No.1 of the scene files.
8