Filter
Top Products
33
Setup menus
The underlined items indicates the initial setting.
SYSTEM menu
No./Item Description
18
SYS H
OFFSET
System phase adjustment.
0000 –3
:–13.4 µsec
0001 –2
:–8.96 µsec
0002 –1
:–4.52 µsec
0003 0
:0 sec
0004 1
:+4.52 µsec
0005 2
:+8.96 µsec
0006 3
:+13.4 µsec
<Note>
Factory settings will remain unchanged even if an
attempt is
19
SYS SC/H
This sets whether the system phase is to be
adjusted by the unit or from the external
encoder remote controller.
0000
REMOTE
:
The system phase is adjusted from the
external encoder remote controller.
0001 LOCAL
:
The system phase is adjusted by the unit.
<Note>
This setting does not take effect when LOCAL
has been selected as the SYSTEM menu item
No. 10 (ENCODER SEL) setting.
22
VIDEO LEVEL
This sets the video level.
Max. variable range: ±3 dB
0000 –128
::
0128 0
::
0255 127
23
[525i system]
SET UP LEVEL
[625i system]
BLACK LEVEL
SD955B
This sets the setup (black) level.
Max. variable range: 14 IRE (100 mV)
0000 –128
::
0128 0
::
0255 127
24
[525i system]
HUE
[625i system]
CHROMA PHASE
SD955B
This sets the hue (chroma phase).
Max. variable range: ±30°
0000 –128
::
0128
0
::
0255 127
25
CHROMA
LEVEL
This sets the chroma level.
Max. variable range: ±3 dB
0000 –128
::
0128
0
::
0255 127
No./Item Description
30
MENU LOCK
This selects whether the system file lock
mode is to be engaged or released.
0000 OFF
:The lock is released (file data
can be changed).
0001 ON
:The lock is engaged (file data
cannot be changed).
<Note>
Setup menu No. 00 (WFM SEL) can be changed
at any time regardless of the setting selected for
this menu item.
Video output signal adjustments
The video output signal adjustments are made by selecting the SYSTEM menu item No. 10 (ENCODER SEL) and
No. 19 (SYS SC/H) settings.
These adjustments can be used for analog component, analog composite and SDI signal output.
A control matrix of the adjustments is shown below.
Setting
SYSTEM menu item
10: ENCODER SEL
LOCAL
REMOTE
LOCAL
LOCAL
Unit
Unit
Unit
External encoder remote
controller
External encoder remote controller
REMOTE
REMOTE
SYSTEM menu item
19: SYS SC/H
SYSTEM menu item
11: SYS SC COAR.
12: SYS SC FINE
13: SYS H
SYSTEM menu item
22: VIDEO LEVEL
23: SET UP LEVEL/BLACK LEVEL
24: HUE/CHROMA PHASE
25: CHROMA LEVEL
Item adjusted