Filter
Top Products
41
Setup menus
The underlined items indicates the initial setting.
USER menu
<EDIT>
No./Item Description
320
VAR FWD
MAX
This sets the maximum SLOW FWD speed.
0000 +4.1
:+4.1 (+3.1)a speed
0001 +1.85
:+1.85a speed
0002 +1
:+1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis ( ).
OAt any speed setting other than +4.1, the
phase cannot be synchronized from the editing
controller.
323
JOG FWD
MAX
This sets the maximum JOG FWD speed.
0000 +4.1
:+4.1 (+3.1)a speed
0001 +1.85
:+1.85a speed
0002 +1
:+1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis ( ).
OThe maximum speed is set to +1a when the
dial on the front panel is operated.
OAt any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
324
JOG REV MAX
This sets the maximum JOG REV speed.
0000 –4.1
:–4.1 (–3.1)a speed
0001 –1.85
:–1.85a speed
0002 –1
:–1a speed
0003 –0.43
:–0.43 (–0.5)a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis ( ).
OThe maximum speed is set to –1a when the
dial on the front panel is operated.
325
POSTROLL
TM
SD955B
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-
second units.
0000 0s
0001 1s
0002 2s
0003 3s
0004 4s
0005 5s
321
VAR REV MAX
This sets the maximum SLOW REV speed.
0000 –4.1
:–4.1 (–3.1)a speed
0001 –1.85
:–1.85a speed
0002 –1
:–1a speed
0003 –0.43
:–0.43a speed
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
No./Item Description
309
EDIT RPLCEC
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF
:
Not set.
0001 CH1
:
Compliance with analog CH1 edit preset.
0002 CH2
:
Compliance with analog CH2 edit preset.
0003 CH1+2
:
Compliance with either analog CH1 or CH2
edit preset.
310
CONFI EDIT
This selects whether to conduct simultaneous
playback while editing is in progress.
0000 OFF
:No simultaneous playback
0001 ON
:Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
311
AUD EDIT IN
This selects the connection method for the
digital audio edit IN point.
0000 CUT
:Cut processing
0001
FADE
:V Fade processing
312
AUD EDIT
OUT
This selects the connection method for the
digital audio edit OUT point.
0000 CUT
:Cut processing
0001 FADE
:V Fade processing
313
AUTO ENTRY
SD955B
This selects whether the IN point is to be
entered using the PREROLL button when it
has not been entered.
0000 DIS
:IN point is not entered.
0001 ENA
:IN point is entered.
314
CF ADJ SEL
SD955B
This selects the CF adjustment deck with
deck-to-deck editing.
0000
PLAYER
:
The player’s edit IN/OUT points are adjusted.
(reference as the RECORDER side)
0001 RECORD
:
The recorder’s edit IN/OUT points are
adjusted. (reference as the PLAYER side)
315
AFTER
CUE-UP
This selects the mode after cue-up operation
is complete.
0000
STOP
:STOP mode
0001 STILL
:SHTL STILL mode
0002 STILL2
:SLOW STILL mode