Filter
Top Products
45
Setup menus
The underlined items indicates the initial setting.
USER menu
<VIDEO>
No./Item Description No./Item Description
600
INT SG
This selects the internal reference signal.
0001 BB
:
The black burst is generated.
0002 CB100
:
100% color bars are generated.
0003 CB75
:
75% color bars are generated.
601
OUT VSYNC
This selects whether to float the vertical sync
position of the video output in order to align
the video output phase with the input in the
EE/record/edit modes.
0000 N-VF
:Signals are not floated.
0001 VF
:Signals are floated.
602
V-MUTE SEL
This selects whether to mute the video output
signals when a blank on the tape has been
detected during playback.
0000 N-MUTE
:No muting. (Freeze)
0001
LOW RF
:Muting. (Set to gray.)
603
CC (F1)
BLANK
This selects ON or OFF for the closed caption
signal of the first field.
0000 BLANK
:Signal is forcibly blanked.
0001 THRU
:Signal is not blanked.
<Note>
This setup menu is not displayed in the 625i
system.
604
CC (F2)
BLANK
This selects ON or OFF for the closed caption
signal of the second field.
0000 BLANK
:Signal is forcibly blanked.
0001 THRU
:Signal is not blanked.
<Note>
This setup menu is not displayed in the 625i
system.
606
OUT C KILL
This selects chroma color killer processing
for the video output signals.
0000 B/W
:No color signals are output.
0001
COLOR
:Color signals are output.
609
EDH
This selects whether to superimpose EDH
onto the SDI output signals.
0000 OFF
:EDH is not superimposed.
0001 ON
:EDH is superimposed.
<Note>
Even when ON is selected for this setting, EDH is
not superimposed onto the signals output from
the SDI OUT 3 connector if the SUPER switch on
the front panel of the unit is set to ON.
610
P
B/PR IN LV
This selects the analog component input
level.
0000 M
II : M II level
0001
B-CAM
:ß-CAM level
<Notes>
OThis setup menu is not displayed in the 625i
system.
OWhen no optional board (AJ-YA931G) has
been installed, setup menu No. 610 is not
displayed.
614
PB/PR OUT LV
This selects the analog component output
level.
0000 M
II : M II level
0001
B-CAM
:ß-CAM level
<Note>
This setup menu is not displayed in the 625i
system.
611
YC SEP MODE
This selects Y/C separation processing for
the composite input signals.
0000 B/W
:
The signals are processed as B/W signals.
0001 AUTO
:
The signals are automatically detected.
<Note>
When no optional board (AJ-YA931G) has been
installed, setup menu No. 611 is not displayed.
618
INTERPOLATE
This selects the interpolation operation.
Vertical interpolation is conducted automatically
during slow-motion playback to reduce the
vertical movement of the playback pictures.
However, this menu item enables the
interpolation operation to be forcibly turned off.
0000 OFF
:
Interpolation is forcibly turned off.
0001 AUTO
:
Interpolation is automatically turned on during
slow-motion playback.
605
FREEZE SEL
This selects the freeze mode for still pictures.
0000 FIELD
:Field freeze.
0001 FRAME
:Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.