Filter
Top Products
38
Use the following submenus to set headphone output and audio level meters.
Underlined values indicate factory defaults.
*1 When ANALOG is selected in the “INPUT SELECT” menu, the LEVEL METER does not indicate the audio level
meter even when set to ON.
AUDIO
Sub menu Settings Description
INPUT
SELECT
AUTO
ANALOG
Selects input line for audio output to headphone terminal.
<AUTO> When an SDI input line is selected with the [INPUT] button on
the front panel:
embedded audio (SDI terminal)
When input lines other than SDI1 or SDI2 are selected with
the [INPUT] button on the front panel:
analog (AUDIO input terminal)
<ANALOG> Analog (AUDIO input terminal)
EMBEDDED
SELECT L
CH1 - CH8
(Factory
default: CH1)
Selects embedded audio channel output to the left (L) speaker.
EMBEDDED
SELECT R
CH1 - CH8
(Factory
default: CH2)
Selects embedded audio channel output to the right (R) speaker.
LEVEL
METER
*1
OFF
ON
Selects/turns off the audio level meter displayed by OSD.
CH SELECT
8CH
4CH
2CH
Selects the number of audio level meter channels.
0dB POINT
OFF
ON
Selects and turns off 0 dB line on/off displayed on the audio level meter.
CH INFO.
OFF
ON
Selects and turns off displays on the audio level meter.
Main Menu (continued)