Filter
Top Products
appears when
is selected.
: proceed.
: no memory clear.
Cancel
OK
Yes
Really?
32
33
CQ-VD5005W
English
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: clears the memory to default settings
: no memory clear.
The display returns to the previous one.
No
Yes
Input Select
AV1/AV2 input selection
: an external device is connected to AV1.
: skips AV1.
default:
: an external device is connected to AV2.
: car navigation system is connected to
AV2.
: TV tuner is connected to AV2.
: skips AV2.
default:
Note:
¡
If a non-Panasonic navigation system is connected to
this unit, we do not guarantee the operations of the
navigation system.
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (
a Installation
Instructions)
: connected to the CAMERA IN
: unconnected
default:
Note:
¡
Make sure to select when no rear view camera is
connected.
¡
The image from the rear view camera may be blurred
in the night or a dark place.
Off
Off
Off
On
(Rear view camera set up)
Camera
AV2
Skip
TV
NAVI
AV2
(AV2 input selection)
AV2
AV1
Skip
AV1
(AV1 input selection)
AV1
Other
Other settings
: sets to ON if your car has ACC position.
: sets to OFF if your car has no ACC posi-
tion.
default:
Note:
¡
For an ACC-equipped car, select ON. The following
functions are available.
¡
The power is turned on automatically when inserting
a disc or magazine.
¡
selection disables turning on the power of the
main unit through the remote control.
: activates the security alarm.
(a page 11)
: inactivates the security alarm.
default:
On
Off
On
(Security Alarm)
Security Alarm
Off
On
Off
On
(Setting ACC selection ON and
OFF)
ACC Select
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.