Filter
Top Products
VIDEO OUT
PRE OUT REAR
REMOTE OUT
PRE OUT FRONT
CAMERA IN
AV2 IN
10
11
CQ-VD5005W
English
Note:
¡To prevent from damage to the unit, be sure to follow the wiring diagrams below.
¡Be sure to fully plug in the connectors. Secure them with clamps and tapes.
¡All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or
your dealer if other methods are required.
¡Installation of this product may interfere with the grounding properly. In such a case, connect the ground lead of the
external equipment to be connected to the mounting bolt r that secures this product.
¡The pre-out connector is used exclusively to an external amplifier. Accordingly, do not connect the audio input termi-
nal and the like of other external devices to this connector.
Video Output Terminal (VIDEO OUT)
Connect the rear monitor. (
a page 14)
Radio Antenna Connector (RADIO ANT IN)
Pre-Out Connector (front)
To an external amplifier.
Pre-Out Connector (rear)
To an external amplifier.
Remote-Out Lead
To Remote-In of connected device.
Video Input Terminal (AV2 IN)
Connect a TV tuner, VCR, camcorder, other
brand’s car navigation system, etc. (a page
15)
Camera Input Terminal (CAMERA IN)
Connect a rear view camera. (
a page 13)
(Yellow)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(Yellow)
(Yellow)
(Black)
CQ-VD5005W
(Rear)
1
3
2
*Fuse (15 A) Refer fuse replacement to
your nearest authorized Panasonic
Service Center. Do not try fuse replace-
ment by yourself.